turn indicator

同根派生

With wrench, turn indicator to open position on indicator plate. Do not force past this point.
用扳手將指示器旋轉到指示器板上的開位置。不要用力超過這個點。
Carefully remove the handwheel and turn indicator sleeve assembly, leaving the valve at its balance set point.
小心拆卸手輪，并旋轉指示器套筒總成，將閥門保留在它的平衡設置點上。
Reinstall turn indicator assembly. Scale retaining ring should be hand-tight Do not overtighten.
重新安裝旋轉指示器總成?？潭裙潭ōh(huán)應該用手緊固。不要過緊。
Loosen scale retaining ring and remove turn indicator assembly. It is not necessary to change the memory set point.
松開刻度固定環，拆卸旋轉指示器總成。不需要改變記憶設置點。
Remove handwheel and turn indicator sleeve by grasping the handwheel and pulling away from the valve body along the stem.
拆卸手輪，并通過抓住手輪旋轉指示器套筒，將其沿著閥桿從閥體內拉出。